| Subject | Text |
| problem dark picture samsung chassis s15a | hi i have a problem in a tv samsung chassis s 15a
a picture is dark , i already change IC TDA 8842 |
| Sharp Aquos LC-52D62U, dead and pwr light flashes 4 times | When you try to turn the set on, there is a small patch of white flashing on the screen and then the |
|
|
| picture light to dark and back | Hello there. Toshiba Cinema series Model CN27C90. Occasionally when I first turn it on the picture l |
| light bulb broke off the wires for main display | I have a 1995 RX-V850 Yamaha Stereo Rec. the through the hole light bulb that lights up the main dis |
| Dark Shade on Screen/ I miss my projector | [b:1c5e916565] I have a 6100 BenQ projector,when the old lamp was at the end of its time a dark sha |
| Panasonic TX-26LXD1/TX-32LXD1 standby light flashing | Does anyone have available the service manual for the above LCD television (Panasonic TX-26LXD1 or T |
| Re: light bulb broke off the wires for main display | [quote:9d1879eb2d="Dean"]I have a 1995 RX-V850 Yamaha Stereo Rec. the through the hole light bulb ha |
| Re: On Bulbs | [quote:9dde599bbc="Bangonkali"][quote:9dde599bbc]An IC on the Power Supply / Inverter printed circui |
| Playback is dark | I recently purchased a SONY DVD Recorder & Hard Disk Drive (HDD) Combo (RDR-HX715/KIT). When I |
| light bulb broke off the wires for main display | I have a 1995 RX-V850 Yamaha Stereo Rec. the through the hole light bulb that lights up the main dis |
| I guess it really depends if it is a plasma or LCD. If this is a LCD, then the problem might just b |
| Re: Philips Magnavox 9P6444 64" RPTV has Green Haze | [quote:b1dfe1bdba="NTL1991"]Hello. I have a Philips Magnavox 64" Rear-Projection TV that was ma |
| Palsonic 5179 DARK Picture ??? | Ive had this tv a while but only recently the picture has become dark...
Even after adjusting the b |
| Samsung 440(?) 8mm camcorder - lcd screen gone dark | my lcd screen has gone dark. You can still BARELY make out images, but it is very dark. It still w |
| dark screen on my westpoint tv model no. cxw3708(14'') | This westpoint tv comes on with the onscreen displays but the tv screen stays dark, no rasters,no pi |
| Philips 29PT6231 Dead with stdby light blinking | Initially, Philips 29PT6231 set completely dead. No picture, no stdby light, no sound except for tic |
| LED On at dark Schematic? | Does any one have a schematic to hook up a led on 3 1.5v batteries so that it will turn on at dark w |
|
|
| dark picture | i vave a very dark picture on my tv. there is an adjustment on the board but it is turned up all the |
| Philips 29PT6231 Dead with stdby light blinking | Thanks buddy. I've got a copy of the service manual for A8.0a chasis. After replacing the hort outpu |
| light bulb broke off the wires for main display | I have a 1995 RX-V850 Yamaha Stereo Rec. the through the hole light bulb has filaments not LED. that |
| Re: light bulb broke off the wires for main display | [quote:cd866af1bf="Dean"]I have a 1995 RX-V850 Yamaha Stereo Rec. the through the hole light bulb th |
| me too me too | Not a sound problem, but the remote quit,... The front faceplate quit, "sometimes" it will |
| Re: sony too dark | [quote:60018a6c7e="ismail1945"]Go to CRT board and check the resistor linked to G2, usualy 680k.It m |
| Light stopped working on old Saisho microwave | Hello - only a minor problem but I would like to fix it! My elderly Saisho MW700 microwave is workin |
| Stanby light flashing goodmans W322 NS | The tv will not power up, the standby led flashes very dimly continuously. Any ideas what the proble |
| dark picture | i tried the pot marked screen with no help. i was told that you can wrap a few turns of 18 GA wire a |
| sony too dark | Go to CRT board and check the resistor linked to G2, usualy 680k.It may
be open.
ismail@teledata |
| Sony TV image too dark | I have to repair my Sony KV32WS4E
The TV lost all his bright. You can see the image, but it is like |
| Toshiba TV quits @ bright light | Hi everyone,
I know very little about electronics but I wanted to exhaust all my options before cal |
| lcd screen dark | Hi,
maybe the backlight for lcd display is gone. check voltage supply to light tube, or try chang |